Domex Steel Plates Sheets, High tensile Steel Plates Sheets, Domex 110XF Steel Plates Sheets, Strenx Steel Plates Sheets and Domex Structural Steel Plates Sheets
Leomet Alloys are one of the prominent Domex High Tensile Steel Plates Supplier, Manufacturer & Exporters. Domex 700 MC IS Hot rolled, extra high strength, cold forming steel from SSAB Sweden. Domex cold forming steels are thermo-mechanically rolled in modern plants where the heating, rolling and cooling processes are carefully controlled. The chemical analysis, consisting of low levels of carbon and manganese has precise addition of grain refiners such as niobium, titanium or vanadium. This together with a clean structure, makes Domex Steels the most competitive alternative for cold formed and welded products. Domex 700 MC with designation D and E meet and exceed the demands for steel S700MC in EN-10149-2.
Applications Load carrying structures having high demands on low weight.
The extra high strength steel grades are used in applications such as truck chassis, cranes and earthmoving machines. In these applications, the high strength of the steels is used to save weight and/or to increase the payload. As a result of this and the good formability of the steels, the total costs can be reduced.
Size: 05mm~ 30mm x 1500mm ~12000mm
Domex 700, weldox 700 equivalent,Domex Plates,Dillidur 400,Welten 780E plates,Domex plates,Hardox 400,Hardox 400 equivalent,Hardox 500,Hardox 500 equivalent, Domex High Tensile Steel Plates Sheets Manufacturer,S690QL,S690 QL plates, S690 QL , TISCRAL, C45 PLATES, Domex High Tensile Steel Plates Sheets Exporter, Domex High Tensile Steel Plates Sheets, Domex High Tensile Steel Plates, Structural Steel Equivalent Plates, Structural Steel Equivalent Sheets, Domex High Tensile Steel Plates Sheets Stockist, Domex High Tensile Steel Plates mumbai, Domex High Tensile drilling Sheets Plates, S690 QL, S690 QL high yield Steel plates, High strength steels S690 QL Plates, Domex High Tensilel Wear Plates, Domex High Tensile, S690QL Plates, Tiscral LAS07, Tiscral, Tiscral.
Chemical Composition of Domex High Tensile Steel Plates
|Grade||Al max||B max||C max||Fe max||Mn max||Mo max||P max||Si max||S max|
Mechanical Properties of Domex High Tensile Steel Plates
|Ultimate Tensile Strength||Yield strength Rp 0.2, min MPa||Elongation at Break||Impact||Bend radius (Minimum)|
|750 - 950 MPa||700 MPa||10 - 12 %||71 J/cm²; -20°C||1.0 t - t(3mm; internal bend radius, 90°)|
For any enquiry related to Domex High Tensile Steel Plates get back to us on :-
+91-22-66109257 / 66102819 / 66595069